8 Channel USB/Wireless Relay Bluetooth Android Smartphone Control Kit (+Temperature sensor DS18B20)

This is a WIFI Relay remote control kit.

Include

1x 8 Channel USB/Wireless Relay Module (Temperature Sensor Support )

1x Bluetooth bee module

1x Water proof DS18B20

1x Mini usb cable

Description:

First,this USB/Wireless Relay Module allows computer control external devices ON/OFF via the computer USB port..

Furthermore, It has a wireless extension port, can work with XBEE or Bluetooth Bee or Wifly Module, that mean now you can control your device via zigbee or Bluetooth or WiFi !

The TOSR08-T module can powered by USB bus or DC power and provides four volt free contact relay outputs with a current rating of up to 10 Amp each.

It provides a DS18B20 temperature sensor port. You can use it make thermostat or any other similar application and so on.

Relay power rating
If the relay is used at a voltage or current exceeding this specification, the life of the contacts may be significantly shortened.

If you use DC Power ,the Input voltage should be DC5V.

First Step – Install the Driver
The TOSR0x module uses FT232RL USB to UART chip .

Connect the TOSR0x and windows will detect it and ask for the drivers. Point windows to the inf folder and it will install the driver.

The TOSR0x will now appear as a com port.

Commands
The TOSR0x operates with an easy to use command set as described in the table below.

TOSR0x Baud rate : 9600

Test program and example source code
To get the TOSR0x up and running in the minimum amount of time we have put together an example program to demonstrate the functionality of the module.

Documents:

Please leave message to us to ask for the document.