Newest 2G 3G LCD Signal booster ! GSM 900 GSM 2100 Mobile Phone Booster Amplifier 3G GSM Repeater + antenna 1 set

If you need other Signal Boosters and accessories , please click

2G 3G dual band signal booster 900mhz 2100mhz GOLD BOX DUAL BAR SHOWN INDICATED

This Mobile Phone Signal Booster / Repeater Set – 2G(900 mhz) plus 3G (2100 mhz) frequency is compatible with all the Networks/Operators having GSM 900 mhz and 3G (2100 mhz like) frequency networks world wide coutries. It can be used upto the range of 500 – 2000 m2. The kit comes with everything and you don’t need anything else. It is very easy to install and also comes with full instructions.

Selling Point:

1.GSM900MHZ+2100MHZ dual band repeater ,amplify double signal

2.Dual band,2G+3G SIGNAL EXTEND

3.500-2000sqare meter coverage without barrier

4.65db high gain 20dbm output power

5.Easy to install.

Cell phone signal amplifier (also referred to as signal booster or direct signal amplifying station) is designed to solve cell phone signal blind. In some location such as remote area from base station, high-rise, basement, location behind by building, underground civil air defense projects, subway stations, elevator and many other places, cell phone can not be used due to receiving signals fail. This cell phone signal amplifier is aimed to solve the problems.

Product Feature:
1.High linear design,AGC/MGC function.Little interference to BTS
2.Provide quick coverage solution for signal weak and blind area,no more drop calls.
3.Compact size,low consumption,great cover.
4.Cover about 2000sqm without barrier
5.Suitable for all countries,amplify gsm+wcdma signal where signal is weak or blind.

Parameter

• gsm frequency rangeuplink:890-915mhz/downlink:935-960mhz
• wcdma frequency range uplink:1920-1980mhz/downlink:2110-2170mhz
• Booster type: GSM & WCDMA dual band signal booster
• output power:20 dbm
• Gain:65db
• Power supply:AC:100-240V 50/60Hz ; DC: 12V 2A
• power comsumption:less than 4W
• VSWR:less than 1.8
• Dimensions(D*W*H):200*110*25 (mm)
• Coverage:500-2000 squaer meter

Pakage including

1x GSM +WCDMA repeater (2G+3G SIGNAL Amplifier)
1x AC power cord ANY STANDARD ADAPTER IS AVAILABLE
1x outdoor antenna +10m low loss cable
1x Indoor antenna
1x Instruction manual

Installation steps:

Installation steps

1 around the use of mobile phones on the top of the building or to find the direction and position of the strongest signals, as the location of the installation outside antenna

2 after selecting the appropriate position will indoor ah you fixed on the wall or support
3 in related indoor location choosing appropriate location (this site for nearly power supply and outdoor antenna side rain sunscreen and well ventilated for best location) install indoor machine and fixed on the wall or support
4 will be introduced to the outside antenna is suing (OUTDOOR) interface links at this point and OUTDOOR antenna and indoor amplifier
May determine the installation position of indoor antenna fixed antenna
6 INDOOR antenna and received the INDOOR antenna amplifier connection end interface on the other end of receiving repeater machine INDOOR (INDOOR) port

Mobile signal amplifier installation considerations:

1, outdoor antenna installation location must be able to clear on the phone, the installation must be level yagi.

2, eight wood and the distance from the antenna suction a top as far as possible, more than 8 meters, not in the same line of sight range, lest cause self-excited, typical generally use a wall for isolation, the effect is good.
3, 75-5 coaxial line is usually F head through to the host, should be an absolute guarantee F head fastening, recommend the use of 75-7 coaxial feeder effect is obvious.
4, F head must be for 75-5 inch line 75-5 coaxial line should also form a complete set, can appear otherwise can’t install.

Question answer:

1, mobile phone signal amplifier can produce radiation, affect the body health?

A: definitely not.Power is not big, because the downlink power output is only about 500 mw, the relative maximum transmitted power of GSM mobile phone, only 1/20, very small.

2, have electricity, two lights are not bright??
A: very likely ac power supply is unreliable, suggest change the socket.

3, signal full, can’t call, but can come in, what’s the problem?
A: the reason for the mobile launch of signal transmission to the base station can not be a good cause, for many reasons, generally can be adjusted through the yagi direction, such as rotate 360 degrees, choose a good point of view, fixed again.If still can’t solve, you can consider whether or not the connection and joint is too long, or loose, and tighten in place.General section of line no more than 20 meters suitable outdoor, indoor section of the line is not more than 10 meters.

Scope of application:

1) signal blind area of small area or weak signal area: such as underground or semi-underground place of business, small basement, underground parking, etc

2) small hot signals complaints area: such as conference room, small supermarkets, shopping malls, office rooms and small public areas, etc
3) traffic and social influence of big area: bars, Internet cafes, dance halls, cafes, fitness clubs, leisure entertainment, etc
4) elevator, especially in the elevator shaft inconvenient to lay cables of the elevator
5) family, office, luxurious yacht, car, * * system and road safety?Fei miaotuo magpie?
6) there is no signal within a large workshop

Function characteristics:

1) high gain of linear power amplifier

2) automatic level control
3) low noise receiving amplifier
4) there is no disturbance to the base station, opening without need of the original system and the base station parameter to adjust
5) stable and reliable electromagnetic compatibility design
6) do not cause the increase of base station background noise, will not lead to a drop in the quality of base station communication
7) in full-duplex communication way
8) cooling effective and reasonable, beautiful structure, volume is appropriate