New 2.4GHz 4W N 802.11 Wireless Lan Repeater Range Extender WiFi Signal Booster

New Wireless Signal extender wifi 2.4GHz 4W N 802.11 Wireless Lan Repeater Range Extender WiFi Signal Booster Comfast CF-G103

Description:

This 4W wifi signal booster MS-4W is released by izonemall New, High quality with reasonable price that you worth to buy. it can improve your home or anywhere your router can not cover, boost the wireless signal to every corner, so that you can communicat fluently, easy installation and operate it even you can hang up it with 2 hole , compact and very good helper to control your smart home equipment for instance : ip camera , Air Conditioning, washer, cooker, light and so on. bring you compatible life , ok. go buy it now and begain to enjoy it. 2 year warranty promised.

Key Features:

1. 20x the powre, improving the link quality and coverage of certified WLAN devices
2. 2.5dB ultra-low noise
3. Wide 6V to 16v operating input voltage range
4. working with certified IEEE 802,11 b/g/n wireless Lan devices
5. Simply plug and play, no software is required

Specification:

• Frequency range : 2.4~2.5Ghz
• Operating voltage : 6~16V
• Receiving gain: 10dB +/- 1
• Transmission gain : 13dB +/- 1
• Input trigger power : Min 3dBm Max : 20dBm
• Maximum output Power : 36dBm (4W)
• EVM : 3%@28dBm 802.11g 54Mbps OFDM 64QAM BW 20Mhz
• DC supply current : 435mA@pout 28dBm 9V
• Noise figure: <2.4dB
• TX/RX switch time delay : 1us
• LED indicator : Transmitter : Green, Receiver : Red
• Operating ambient temperature : -40 deg +70 deg
• operating humidity : up to 95% rel. humidity
• Dimension : 82x50x21mm
• Weight: 0.25kg net

Package include:

• 1x 4W WiFi Signal Booster,
• 1x 9V 1A Power adapter,
• 1x 20cm RG316 Cable,
• 1x 5dBi Antenna,
• 1x Manual
• Application:
  • Wireless Lan 802.11b/g/n access point clients
  • Based on the 2.4ghz WLAN Wireless base stations
  • Based on the 2.4ghz WLAN wireless bridges
  • Indoor distribution systems (multi-play) in the combiner
  • Based on Zigbee, bluetooth protocol wireless device

  Installation instructions:

• • Step1: disconnect poweer supply to AP/Router
  • Step2: Detach the antenna from your certified wireless AP/Router
  • Step3: Connect RG316 cable ( included n the package) to the booster and AP/Router
  • Step4: Connect the antenna to the other end of the booster
  • Step5: Connect the power supply to the booster first and subsequently the AP/Router

  Using Precautions:

• • Recommend the input power of RFIN port to between 7dbm and 20dBm
  • Make sure all power supply to the booster and the AP/Router unit be disconnected before removing or changing antenna
  • When finishing connecting the booster and the AP/Router, restore power supply first to the booster and then to AP/Router subsequently
  • Waterproof, lighning protection equipment should be attached to outdoor antenna
  • Keep away from heat and keep ventilated
  • Please comply with local regulations of electromagnetic radiation