LRS series 12V 6A led power supply high reliable factory price 75W 12V ac-dc power converter for CCTV camera LRS-75-12
75W Single Output Switching Power Supply LRS-75 series
Features:
Universal AC input/ full range
Withstand 300VAC surge input for 5 seconds
Protections: Short circuit / Overload / Over voltage
Cooling by free air convection
LED indicator for power on
100% full load burn-in test
High operating temperature up to 70deg
High efficiency, long life and high reliability
2 years warranty
OUTPUT |
||||||
Model |
LRS-75-5 |
LRS-75-12 |
LRS-75-15 |
LRS-75-24 |
LRS-75-36 |
LRS-75-48 |
DC Voltage |
5V |
12V |
15V |
24V |
36V |
48V |
Rated Current |
14A |
6A |
5A |
3.2A |
2.1A |
1.6A |
Current Range |
0~14A |
0~6A |
0~5A |
0~3.2A |
0~2.1A |
0~1.6A |
Rated Power |
70W |
72W |
75W |
76.8W |
75.6W |
76.8W |
Ripple & Noise |
100mVp-p |
120mVp-p |
120mVp-p |
150mVp-p |
200mVp-p |
200mVp-p |
Voltage Adj. Range |
4.5 ~ 5.5V |
10.2~ 13.8V |
13.5~18V |
21.6~28.8V |
32.4~39.6V |
43.2~52.8V |
Voltage Tolerance |
±2.0% |
±1.0% |
±1.0% |
±1.0% |
±1.0% |
±1.0% |
Line Regulation |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
Load Regulation |
±1.0% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
Setup, Rise Time |
500ms, 30ms/230VAC 500ms, 30ms/115VAC at full load |
|||||
Hold Up Time |
60ms/230VAC 12ms/115VAC at full load |
|||||
INPUT |
||||||
Voltage Range |
85 ~ 264VAC 120 ~ 373VDC |
|||||
Frequency Range |
47 ~ 63Hz |
|||||
Efficiency |
86.5% |
89% |
89% |
90% |
91.5% |
91.5% |
AC Current |
1.4A/115VAC 0.85A/230VAC |
|||||
Inrush Current |
Cold start 50A/230VAC |
|||||
Leakage Current |
<0.75mA / 240VAC |
|||||
PROTECTION |
||||||
Over Load |
110 ~ 150% rated output power |
|||||
Protection type: Hiccup mode, recovers automatically after fault condition is removed |
||||||
Over Voltage |
5.75~6.75V |
13.8 ~ 16.2V |
18.75~21.75V |
28.8 ~ 33.6V |
41.4~48.6V |
55.2~ 64.8V |
Protection type: shut down o/p voltage, re-power on to recover |
||||||
ENVIRONMENT |
||||||
Working Temp. |
-30 ~ +70deg (Refer to “derating curve”) |
|||||
Working Humidity |
20 ~ 90% RH non-condensing |
|||||
Storage Temp., Humidity |
-40 ~ +85deg, 10 ~ 95% RH |
|||||
Temp. Coefficient |
±0.03%/deg (0 ~ 50deg) |
|||||
Vibration |
10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes |
|||||
SAFETY & EMC |
||||||
Safety Standards |
UL60950-1, TUV EN60950-1, EN60335-1/-2-16, CCC GB4943 approved |
|||||
Withstand Voltage |
I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.25KVAC |
|||||
Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25deg / 70% RH |
|||||
EMC Emission |
Compliance to EN55022(CISPR22), GB9254 CLASS B, EN55014 EN 61000-3-2,-3 |
|||||
EMC Immunity |
Compliance to EN61000-4-2,3,4,5,6,8,11, EN61000-6-2(EN50082-2), heavy industry level, criteria A |
|||||
OTHERS |
||||||
Dimension |
99*82*30mm (L*W*H) |
|||||
Weight |
0.3Kg |
|||||
Packing |
45pcs/carton/14.5kg/0.77CUFT |
|||||
NOTE |
||||||
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25deg of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% to 100% rated load. 6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 7. Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quickly may lead to increase of the set up time. |
0 out of 5 (0 Ratings)
Positive (0%) |
5 Stars (0)
|
4 Stars (0)
|
|
Neutral (0%) |
3 Stars (0)
|
Neutral (0%) |
2 Stars (0)
|
1 Star (0)
|
Name | Rating | Feedback |
---|
Shipping Company | Shipping Cost | Estimated Delivery Time |
---|---|---|
3 - 7 days | ||
3 - 7 days | ||
5 - 14 days | ||
Post Air Mail | Free Shipping | 15 - 45 days |
Return Policy | If the product you receive is not as described or low quality, the seller promises that you may return it before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe) and receive a full refund. The return shipping fee will be paid by you. Or, you can choose to keep the product and agree the refund amount directly with the seller. N.B.: If the seller provides the "Longer Protection" service on this product, you may ask for refund up to 15 days after order completion. |
---|---|
Seller Service | On-time DeliveryIf you do not receive your purchase within 60 days, you can ask for a full refund before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe). |
Most Popular from Category
Huawei phone 3CW battery mobile phone smartphone 5” IPS HD Screen 2800mAh mobile phone batteries Huawei honor 3CW
Factory sale AC DC single output 100W 5V electrical voltage power supply
200W 12V 16A Switching Power Supply Factory Outlet SMPS Driver AC110-220V DC12V Transformer for LED Strip Light Module Display
US $35.80 / piece
360W 36V 10A Switching Power Supply Factory Outlet SMPS Driver AC110-220V DC36V Transformer for LED Strip Light Module Display
US $49.60 / piece
SaveTop Original Lenovo S820 Smartphone Rechargeable Lithium Battery 2000mAh BL210 3.7V Save up to 50%
US $8.60 / piece
MDR-20-12V CE RoHS Approved Hot selling Factory Outlet 20w 12v power supply din rail
online shopping, buying directly from manufacturers?
- Go to Alibaba.com and enter the wanted item into search field.
- Having made your choice, click "Contact supplier" button on the right
- On the next page enter your request and click "Send" button.
- Upon clicking you will be asked to get registered. Do it and wait for the reply.