DC48V 0.5A 10/100Mbps Base-T Power over Ethernet PoE Injector,overload/over power/short circuit protection,US/EU plug optional

Description:

This Non standard active PoE injector is a simple and convenient power supply equipment for PoE or Non PoE devices via Ethernet cable, which will avoid your trouble about power line cabling and save cost. This PoE injector is compatible with all IEEE802.3af network devices, while it does not have auto detection function and directly supply power to the network devices by force as soon as you connect them, so you must be sure that powered devices conform to standard IEEE 802.3af in order to protect them from burning, be sure that your powered device is available for PoE pin 4&5(+), 7&8(-) midspan.

Main Specifications:

1. Power Input

1) Rated Voltage range: AC100~240V 47~ 63Hz

2) Efficiency: >80% (min)

3) AC current: 0.7A(max)

4) Leakage current: <0,25 mA at 250 V

5) Inrush current: <40 A at 230 V

2. Power Output

1) Rated voltage: DC48V

2) Rated current: 0.5A

3) Current range: 0~0.5A

4) Ripple: 480mVp-p

5) Voltage tolerance: ±3.0%

6) Setup, rising time: 500ms, 50ms at full load

7) Hold up time: >5ms at full load

8) PoE pin: 4&5(+), 7&8(-); Data pin: 1236

3. Environment

1) Working temp: 0~+40°C

2) Working humidity: 20 ~90% RH non-condensing

3) Storage temp & humidity: -20~+85°C, 10~95% RH

4) Vibration: EN 61131-2

4. Safety & EMC

1) Standards: design refer to EN60950

2) Withstand voltage: I/P-O/P: 3KVAC, 5mA, 60S

3) Isolation resistance: I/P-O/P: 100M ohms/500VDC

4) EMC: EN55022 Class B

5) Short circuit Protection, Over load protection, Over power protection

6) System reliability: MTBF>100K hourse

7) Conducted interference (CE) and radiated interference (RE), conform to EN60950, CE, FCC standard.

5. Others

1) PoE Protocol: Non IEEE802.3

2) Compatible with IEEE802.3af

3) Lan environment: 10/100Mbps Base-T

4) 2 pin AC plug; RJ45 connectors

6) US/EU power plug optional

7) Warranty Period: 2years

8) Size: 83.5*47*54mm, weight: 85G, Package: 2pcs/Lot

6. Applications:

Access Points, Routers, IP cameras, modems, switches, embedded computers or other network devices, etc.

DC48V 0.5A 10/100Mbps IEEE802.3af Compatible Power over Ethernet PoE Injector PSE(US/EU Power plug optional):

1. Installation Example–Non PoE Switch/Router to POE PD:

2. Installation Example–Non PoE Switch/Router to Non PoE PD: