Baby Monitor Wifi IP Camera DVR Night Vision Mic For IOS System & Andriod Smartphone For all Smart phones

This is a WIFI camera which need to work together with smart phone, it could be used to

monitor in local network or internet both,the adaptive sites are family, shop ,etc.

Two working mode:

(1) AP mode: the device(sunflower camera) will be a WIFI hot, smart phone could connect with

device

(2) Station mode: the device connect with a router, smart phone could visit device by router or internet.

Installing STEPS:

Step 1:

Set the switch button (diagram 1) to AP mode. (Valid distance: indoor 15 to 30 meters, outdoor 50 to 100 meters);LED will flash, please wait till it off, open “WIFI configuration” of your smart phone, search the device name like “MV231975” (diagram 2), to connect with the WIFI device.

Step2: AP mode connecting:

Click “APP” button in software could search device automatically, details as below:

2.1 Auto search

Click “Add” button , device list will show device you connect, click the right device (Diagram 3)

2.2 Manually add device

Click “Add” button to fulfill: Name;device ID;device address :192.168.1.1 ;port is default(no need

change);user name(default):admin;password(default): admin;Click “Save” to save setting. Then you

could see the device in device list. (Diagram 4)

Diagram 3 Diagram 4

Step 3: Station mode connecting:

The mode allows your Smart phone to monitor from remote site by internet, or monitor in local network by LAN router.

This is configuration under the step 2 succeeded, click ”configuration button”(diagram 5), choose “station mode” (diagram 6), click “WIFI mode” and choose a WIFI connected with internet(diagram 7),

click “save” button, it will jump out “configuration success”, click identify key to back. Switch device mode to “station mode” (diagram 8), red and green LED will be ON, device status is “Station mode”

now, open your smart phone WIFI configuration and choose the WIFI the same as the device

connected just now.“search device” or “add device”(refer to 2.1 and 2.2), click the right device to

monitor video and voice.

Diagram 5 Diagram 6

Diagram 7 Diagram 8

Software functions:

1. General info: general information of the device, such as name, user name, password (port and

IP are default, please do not change)

2. Network setting:

AP mode: smart phone and device connect by point to point.

Station mode: it allows device to connect with internet by router, remote monitoring from internet

is able.

3. User management: For revising device user name, password (after changed , please also

change it in “general info” item)