4w WiFi Signal Booster Amplifier Comfast CF-G103 2.4GHz N 802.11 Wireless Lan Repeater Range Extender WiFi Signal Booster

New 4w WiFi Signal Booster Amplifier for 2.4 ghz Wireless Router 802.11 b/g/n

Note: Dear Friend

China Post usually need 20-60 days delivery time,and sometimes over 2 month,if you want to get the goods in short time,please don’t use China Post. If you still not get the goods when the time run out for your order, please contact with us to extend the time, but not open a dispute ! Thanks a lot.

Description:

This 4W wifi signal booster MS-4W is released by izonemall New, High quality with reasonable price that you worth to buy. it can improve your home or anywhere your router can not cover, boost the wireless signal to every corner, so that you can communicat fluently, easy installation and operate it even you can hang up it with 2 hole , compact and very good helper to control your smart home equipment for instance : ip camera , Air Conditioning, washer, cooker, light and so on. bring you compatible life , ok. go buy it now and begain to enjoy it. 2 year warranty promised.

Specification:

Frequency range : 2.4~2.5Ghz

Operating voltage : 6~16V

Receiving gain: 10dB +/- 1

Transmission gain : 13dB +/- 1

Input trigger power : Min 3dBm Max : 20dBm

Maximum output Power : 36dBm (4W)

EVM : 3%@28dBm 802.11g 54Mbps OFDM 64QAM BW 20Mhz

DC supply current : 435mA@pout 28dBm 9V

Noise figure: <2.4dB

TX/RX switch time delay : 1us

LED indicator : Transmitter : Green, Receiver : Red

Operating ambient temperature : -40 deg +70 deg

operating humidity : up to 95% rel. humidity

Dimension : 82x50x21mm

Weight: 0.25kg net

Key Features:

20x the powre, improving the link quality and coverage of certified WLAN devices

2.5dB ultra-low noise

Wide 6V to 16v operating input voltage range

working with certified IEEE 802,11 b/g/n wireless Lan devices

Simply plug and play, no software is required

Package include:

1x 4W WiFi Signal Booster,

1x 9V 1A Power adapter,

1x 20cm RG316 Cable,

1x 5dBi Antenna,

1x Manual

Application:

Wireless Lan 802.11b/g/n access point clients

Based on the 2.4ghz WLAN Wireless base stations

Based on the 2.4ghz WLAN wireless bridges

Indoor distribution systems (multi-play) in the combiner

Based on Zigbee, bluetooth protocol wireless device

Installation instructions:

Step1: disconnect poweer supply to AP/Router

Step2: Detach the antenna from your certified wireless AP/Router

Step3: Connect RG316 cable ( included n the package) to the booster and AP/Router

Step4: Connect the antenna to the other end of the booster

Step5: Connect the power supply to the booster first and subsequently the AP/Router

Using Precautions:

Recommend the input power of RFIN port to between 7dbm and 20dBm

Make sure all power supply to the booster and the AP/Router unit be disconnected before removing or changing antenna

When finishing connecting the booster and the AP/Router, restore power supply first to the booster and then to AP/Router subsequently

Waterproof, lighning protection equipment should be attached to outdoor antenna

Keep away from heat and keep ventilated

Please comply with local regulations of electromagnetic radiation